Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
Electronic Water Control (EWC)
Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
Semi-Automatic Belt Tensioning
With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Electronically Controlled Fuel Injection System
The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Common Features for STIHL Cutquik® Cut-off Machines
View the features common to many STIHL Cutquik® Cut-off Machines.
HP Ultra 2-Cycle Engine OilNo matter how you slice it (or trim it or shred it), there’s no better protection for your high performance 2-stroke engine than STIHL HP Ultra. This 2-cycle engine oil has outstanding engine cleaning characteristics, plus “ultra” lubricating qualities that’s superior to other 2-cycle engine oils. This fully synthetic oil is also highly biodegradable, degrading by 80% in 21 days. We’re so confident this oil will protect your engine, we’ll double your STIHL limited warranty* when you use it. It’s that good.
*Double your warranty when you include 6 bottles of STIHL HP Ultra Oil or 6 cans of STIHL MotoMix® Premixed Fuel with your STIHL product purchase. Double limited warranty protection applies to STIHL gasoline-powered products purchased and registered for personal non-income producing, family and household purposes only. Other restrictions apply. See dealer for details.
Anti-Vibration GlovesReduce the vibration from handheld machines with anti-vibration gloves from STIHL. The palms and fingers are specially designed to absorb vibration energy, helping you stay steady throughout your workday.
Classifications: Meets anti-vibration standard ISO 10819:1996 and ANSI S2.73.
-TRm at .72 for mid-frequency range
-TRh at .55 for high-frequency range
Materials: 7-gauge knit shell, shock-absorbing material and elastic wrist
Available sizes: L, XL
STIHL® Construction Hard Hat SystemCombining first-class durability and all-day comfort, the STIHL Construction Hard Hat System gives your projects a proper foundation in protection. The system starts with a hard hat made from tough ABS thermoplastic. A six-point ratchet-style suspension system improves comfort, as well as shock absorption. The system also features a Cool Guard sweat band and rain gutters, keeping both perspiration away from your eyes and precipitation away from your neck. Its comfortable, adjustable hearing protection help keep down job site noise while its clear, PETG full-face shield helps keep your face protected from flying debris.
Meets ANSI Z89.1-1997 Type 1 Class. Hearing Protectors meet ANSI S3.19-1974 Noise Reduction Rating (NRR) of 23 dB(A). Full Face Shield meets ANSI Z87.1-1989.
NOTE: Also available as a hard hat only. Meets ANSI Z89.1-1997 Type 1 Class G & C.
Leather ChapsDesigned for use with cut-off machines, these top-quality STIHL Leather Chaps provide maximum protection from abrasion, spatter and sparks when cutting ferrous metals. The chaps cover from the waist down, and feature quick-release buckles as well as easily adjustable nylon straps. Not for use with chain saws.
Available color: Natural Leather
Available sizes: One size fits most
Available length: 40"
STIHL products sold through U.S. STIHL dealers are for distribution in the United States only.
Reserve Now for In-store Pick Up
With STIHL Express, you can reserve the STIHL product you need right from your home or office and pick it up at your local STIHL Dealer.
- Compare STIHL products online 24 hours a day, 7 days a week.
- Pick up products assembled and ready to go
- Get the ease of reserving online while still having access to advice from your local STIHL Dealer.
Distributor Suggested Retail Price
TS 500i STIHL Cutquik® Description
STIHL offers another industry first with the TS 500i STIHL Cutquik® cut-off machine. Featuring the handheld outdoor power equipment industry’s first electronically controlled fuel-injection system, the TS 500i increases power by 17% and cutting speed by 15%, as compared to the STIHL TS 420.
Powerful, lightweight and well-balanced, the STIHL TS 500i is designed for superior handling during the toughest jobs. The low-emission engine provides optimal torque throughout the RPM range and eliminates the need for a choke, simplifying the starting procedure. The standard electronic water control feature allows for easy and efficient water flow adjustment while cutting. The X2 air filtration system is virtually maintenance-free and maintains an incredible 99.96% cleaning efficiency.